메뉴 건너뛰기

자료실

자료실

조회 수 434 추천 수 0 댓글 0
Mytek Brookyn 펌웨어 업데이트 파일입니다. 

업데이트시 반드시 제품설명서를 참고하시기 바라며, 
파일 변환 등 기타 잘못된 방법으로 인한 업데이트시 발생한 문제에 관해서는 당사에서 책임지지 않습니다. 

아래 릴리즈노트를 확인하시기 바랍니다. 

감사합니다. 

-------------


Mytek Digital 2017 / Brooklyn DAC firmware version 2.22

Important notes:

To update Brooklyn DAC firmware to the latest revision an installed the Mytek Control Panel is required. The update can be performed on Windows 7,8,10 and OSX Yosemite / El Capitan.


How to update the firmware:

Start Mytek Control Panel application. The program ("General" tab / "Firmware" section) will show you the current revision of your unit, and whether it needs an update or not. If so, then simply press the "Load firmware file" button to find the firmware file (Mytek_BrooklynDAC_firmware_v.2.xx.mfb). Next click "Update" button. A progress bar will indicate when the flash process is finished.
The DAC will reset itself. Before using restore the Brooklyn DAC to factory settings. A reboot of the computer is not necessary.


When the update fails:

Disconnect power cord. Press and hold the first (from the left) button and connect the power again. The DAC will start in Bootloader mode - the logo will start blinking. The flash process should then be tried again.


Firmware revision history:

v.2.22 / 2017-01-13

	- fixed; display artefacts removed 

v.2.21 / 2016-08-30 

	- fixed: wrong Bit rate shown on the display
	- improved: USB playback

v.2.20 / 2016-07-27	

	- new function Mastering PCM (Mono, L-R, MS)
	- new function Mute      
	- new function Phase
	- new function Main Balance
	- fixed 192kHz playback issue.

v.2.13 / 2016-06-30

	- fixed stuttering playback on El Capitan

v.2.12 / 2016-06-24

	- minor bugs has been fixed

v.2.11 / 2016-06-23

	- new function usb recording from all digital inputs simultaneously 
	- improved dsd playback (clicks)

v.2.10 / 2016-06-22

	- new function display brightness
	- new function display auto off
	- new function auto return to simple screen
	- new function tiles color same as device color
	- new function input change is shown on the simple screen for 2s  (e.g. input source change). After change param information about it is shown in place of frequency/mode/bits
	- fixed recording

v.2.09 / 2016-06-17

	- fixed clicks occured when native dsd playback started or stoped

v.2.08 / 2016-05-19 
    
	- fixed dsd level
	- fixed meters indications for dsd. 
	- minor bugs were fixed

v.2.07 / 2016-05-15

	- new function white colour added
	- colour names added 
	- Mytek Control Panel colours adjusted 
	- new function standby diode brighness added; now the logo can be turned off in standby mode

v.2.05 / 2016-04-11  
   
	- fixed showing "no lock" when mqa is enabled
	- fixed slow changing of synchronization settings

v.2.04 / 2016-04-10   
  
	- added auto power on mode (device start after power up in last state - standby or work)
	- changed starting screen, new one contains mytek logo and loading animation
	- changed shutdown screen (before standby), new one contains text "Standby" and animated icon
	- added to standby screen text "press knob to start"
	- added delayed display power off - text "press knob to start" is shown by 10s after enter to standby
	- added infinity character in volume control and meters
	- cleaned up fonts code and names
			
v.2.00 / 2016-04-04	

	- MQA decoder enabled
	- Added PCM filter settings
	- Added DSD filter settings
	- Added ESS reset in standby
	- Added ESS soft mute during clock source/input source change
	- Switched off i2s clocks in standby
	- Fixed bug with noise and bit meter's wrong readings after wakeup

v.1.45 / 2016-02-12	

	- changed max display's current to 140% of nominal.
	- Added dynamic gamma table generation (based on parameters) and picked out the best values of those parameters. 

v.1.44 / 2016-02-08	

	- fixed dropped playback on osx El Capitan at 192kHz. 
					
v.1.43 / 2016-02-07
	
	- usb playback on osx work properly for every input sources. 
					
v.1.42 / 2016-01-15
	
	- Fixed aes bugs: temporary no data on active aes when changing fs

v1.41 / 2016-01-13
	
	- fixed 48.0k and multiplies playback on osx.
	- MQA temporarily set to off
			

Copyright Mytek Digital 01/2017 All rights reserved. 
Windows 7/8/10 are trademarks of Microsoft Corporation.
OSX Yosemite, El Capitan are trademarks of Apple Inc.

 

다운로드

Mytek_BrooklynDAC_firmware_v.2.22.zip


List of Articles
번호 제목 글쓴이 날짜 조회 수
3 [펌웨어] Mytek Bridge v1.54 KOR (WIFI) file 체스오디오 2022.01.18 402
2 [펌웨어] Brooklyn Bridge V1.53 file 체스오디오 2022.01.10 252
» [펌웨어] Brooklyn DAC ver. 2.22 file 체스오디오 2017.04.17 434
목록
Board Pagination Prev 1 Next
/ 1
위로